top of page
Radio upgrade for BMW 1S E81, E82, E88 2006 - 2012 m/AC
  • Radio upgrade for BMW 1S E81, E82, E88 2006 - 2012 m/AC

    SKU: CPT-8821GB

    Aftermarket screen BMW 1S E81 E82 E87 2006, 2007, 2008, 2009, 2010, 2011, 2012 

    GPS navigation screen / radio upgrade 6.2".


    Note: for manual AC


    Brand: CarPlayTech

    OS: Android 9.0 

    General Description
    PX5 module uses 64 bit architecture, 8 core Cortex-A53 CPU processor, Android 9.0 operating system, abundant peripheral interface


    - touch screen intertaiment multimedia head unit designed special for your car

    - Apple CarPlay via wireless/wired dongle (optional) 

    - at lower power consumption at power on it support sleep mode, starting is up a few seconds
    - 64 bit 8 core Cortex-A53 CP, 1.5GHz
    - power VR SGX6110 GPU 
    - memory RAM DDR3

    - capacity ROM 2GB
    - applied eMMC high speed flash

    - ROM 32GB 


    - backup camera, front camera and etc.

    - video / audio outputs  
    - screen resolution 800*480 & 1024*600 
    - portrait screen resolution 1280*960 & 1024*720
    - video format: MPEG-1, MPEG-2, MPEG-4, H.263, H.264, AVS, VC-1, VP8, MVC
    - capacitive touch screen (supported study calibration function)
    - built-in GPS & GLONASS dual satellite location  
    - driving recorder function 
    - a variety of audio formats 
    - upgrade via SD or USB port 


    Electrical specifications:
    - input voltage: 3.8~5.5V, recommended voltage 5V 
    - maximum input current: 2200mA
    - sleep current: about 7 mA 
    - working temperature: -30~+75℃

    - forbid with electricity to mounting and dismounting of the module
    - all of external interface (SD-CARD, USB, etc.) need add ESD protective  devices

    Full tech support 100% | installation or help you with it  | warranty 12 months    



    1. If you are not sure about fits, take a picture of a dashboard (radio + screen) and send it to

    2. This unit does not support OEM backup camera. There are two ways:

    - find OEM wires of backup camera (video signal + power). Make connect aftermarket RCA plug (male) to the OEM video signal wires. You need to get a power converter 12V to 6V. (OEM camera has power +6 or 12V) + correct connection and that's it.  

    - Get an aftermarket camera. 

    3. The product does not support OEM CD/DVD changer  

    4. The product does not support OEM SiriusXM

    5. For most models requires the Fiber Optic Adapter. (fiber optic - is orange or green double plastic tube which is between head unit and OEM amplifier). 

    - If you wish to save an OEM amp then you will need to buy an Optic Fiber Convertor.

    - If you don't need an OEM amp/ or it's broken - you can run new speaker wires from the new head unit to each speaker. In this case you will lost only OEM sub. 2/4 Ohm

    - If you wish to install an aftermarket amp, then ok, the new head unit has everything for that (audio outputs/power control etc.)    

    6. Most models require the extension kit (radio wire antenna etc.). Please take 10 min to take off the radio / or with other ways check it. The radio and sound amplifier are in the trunk.      

    bottom of page